Remove code from build.psm1 that save the modules to a versioned folder. For servicing reasons after release it is preferred and easier to not have the versioned folder so that we can directly replace modules that need to be serviced (MSI specifically makes it difficult to service a module if the folder path changes).
The intent was to have the version of the PSSessionConfiguration name not include the `v` for the version string. Also, Preview releases should standardize on `PowerShell.6-Preview` instead of clobbering `PowerShell.6` so that stable and preview can co-exist side-by-side.
Need to verify on Win10 IoT if `Install-PowerShellRemoting.ps1` is still needed anymore as it may be possible to run `pwsh -c enable-psremoting` from within Windows PowerShell Core removing the need for that script which duplicates `Enable-PSRemoting` capability.
Update: Not able to get the current master build working on Win10 IoT, getting `Invalid access to memory` error. Will have to investigate this separately from this PR and keep `Install-PowerShellRemoting.ps1` for now.
Fix https://github.com/PowerShell/PowerShell/issues/7119
The intent was to have the version of the PSSessionConfiguration name not include the `v` for the version string. Also, Preview releases should standardize on `PowerShell.6-Preview` instead of clobbering `PowerShell.6` so that stable and preview can co-exist side-by-side.
Need to verify on Win10 IoT if `Install-PowerShellRemoting.ps1` is still needed anymore as it may be possible to run `pwsh -c enable-psremoting` from within Windows PowerShell Core removing the need for that script which duplicates `Enable-PSRemoting` capability.
Update: Not able to get the current master build working on Win10 IoT, getting `Invalid access to memory` error. Will have to investigate this separately from this PR and keep `Install-PowerShellRemoting.ps1` for now.
Fix https://github.com/PowerShell/PowerShell/issues/7119
Currently, the remote prompt only shows the remote computer name:
> [computer] PS:\foo>
With this change, if you use PSRP over SSH and you specified a different username, it shows whom you logged in as:
> [user@computer] PS:\foo>
The fix is when the remote prompt is being created to check if using SSH if so, check if the current user is different than the specified user and specified. If different, use `[user@computer]`, otherwise fallback to default `[computer]` prompt.
Fix https://github.com/PowerShell/PowerShell/issues/7156
Previously, we limited use of UseShellExecute when starting a new process to only Windows Desktop. However, CoreFx now supports UseShellExecute (appropriately calling `open` on macOS and `xdg-open` on Linux) so we can have a consistent code and remove some of the existing redundant code or unnecessary limiting code.
PSRP currently relies on XML for the transport messages. When using PSRP over SSH, if the target side fails, it sends back a text message. PSRP sees this and doesn't know what to do so it throws
a generic message which makes troubleshooting the issue more difficult. Change here is to throw
the text message which now looks like:
>new-pssession : [test-machine] There is an error processing data from the background process. Error reported: Invalid argument '-np', did you mean:.
Previously:
>new-pssession : [test-machine] There is an error processing data from the background process. Error reported: Cannot process an element with node type "Text". Only Element and EndElement node types are supported..
Since it's processing one line at a time, not able to get the whole message.
Table formatter was overly aggressive in removing padding so even right justified output (default of numbers) gets incorrectly stripped of padding. Fix is when right justified, always add padding (because it's right justified, there's never trailing whitespace).
setdate.cpp was incorrectly assigning an int to a struct, fixed to initialize struct zero'd
update the typegen project in the bash script
added some help text at top of script for someone trying to build it
updated runtime to linux-musl-x64 instead of linux-x64 as Alpine distro uses the musl libc libraries instead of glibc which is used by most distros.
PowerShell serialization has a list of known PowerShell types. When an object is deserialized containing a known type it tries to deserialize the object to that specific type and throws an exception if it can't succeed. SemanticVersion only exists in PSCore6 so when remoting from Windows PowerShell or importing clixml generated from PSCore6 that contains SemanticVersion, it fails.
With this fix, it will be rehydrated as a "PSObject" with "Deseriealized.System.Management.Automation.SemanticVersion" in the 'TypeNames' in both Windows PowerShell and PowerShell Core.
To support PowerShell modules built with .NET Windows Compatibility Pack, we decided that it was best to ship the WCP assemblies with PS Core. This also adds many new .NET APIs be default while only adding ~3.5 MB additional disk footprint (to a ~137 MB install currently).
Also update the build to adopt the official .NET Core 2.1.
- For ConsoleHosts tests, the test is validating error condition, but did not redirect stderr to stdout so the output isn't captured and thus an empty string failing the assertion.
- For SSHConnectionInfo API tests, it's calling a constructor that got overwritten with a new parameter. Fix is to put back that public API and overload it with a new one.
The current implementation of PSRP over SSH only enables remoting to one version of PowerShell Core 6.
sshd_config allows specifying multiple subsystems that can start different versions of PowerShell Core 6 (or same versions with different parameters).
Enable use of a new -Subsystem parameter to specify the subsystem to use with ssh.
Since a PR added support to opt out of telemetry via an environment variable, we can remove the,
always intended to be a temporary, solution of deleting a file to opt out of telemetry since the
environment variable can be defined at the system level and exist before even installing PowerShell Core.
Because the variable is defined as opt out, a value of true, yes, or 1 means no telemetry is sent.
* In cases where the header spans multiple rows, need to correctly calculate whitespace and trim appropriately
* Use System.Span<int> and C# 7.2 language in SMA
* Added new ref assemblies to Files.wxs
refactor tests to remove similar xml content
added single column test case
If `-sudo` is specified, make sure to include 'RequireSudoOnUnix' tag on Unix if the 'Tag' is not specified.
If `-sudo` is not specified, make sure to exclude `RequireSudoOnUnix` tag on Unix if the 'ExcludeTag' is not specified.
- The original change to remove extra padding didn't take into account alignment.
Fix logic to accommodate left, center, and right alignment in the table format and also add tests.
- Fix ImplicitRemoting test that validates formatting to use same instance due to formatting changes in this PR
- Only use loopback to same powershell instance for formatting test as the other tests implicitly expect Windows PowerShell.
Based on standard practices, we need to have a copyright and license notice at the top of each source file. Removed existing copyrights and updated/added copyright notices for .h, .cpp, .cs, .ps1, and .psm1 files.
Updated module manifests for consistency to have Author = "PowerShell" and Company = "Microsoft Corporation". Removed multiple line breaks.
Separate PR coming to update contribution document for new source files: #6140
Manually reviewed each change.
Fix#6073
* add EnhancedKeyUsageList to default table view of X509Certs
add StatusMessage to default table view of cert signatures
* set fixed width of 20 to Subject so more room for EnhancedKeyUsageList content
change EnhancedKeyUsageList to script to just show the friendly name
When using New-PSSession -SSHTransport -Name ... the Name parameter wasn't being used when creating the remoterunspace so an automatically generated one was always created.
Fix is to explicitly pass the transport name when generating a runspace name including other transports like VMBus and Container.
Refactor runspace name generation code to produce "RunspaceN" and added a Transport property.
Tests will have to wait until we have the infrastructure for remoting tests and Enable-SSHRemoting work is complete.
Fix#5951Fix#2426
Current README uses a PNG which doesn't scale for high dpi displays (starts to look fuzzy).
Created 64 pixel wide version of svg of the black logo and inserted into README.md.
Note that it currently doesn't render as the absolute URL points to master so that it gets
rendered correctly in other places where the README.md is used (like docker hub).
When InitialSessionState initializes it tries to SetLocation to current working directory,
but if the directory name contains PowerShell wildcard characters, it fails and reverts
to $PSHOME.
The change affects Set-Location in that if the path exists (even if containing wildcard characters), just use it. It is a breaking change.
* enable win-arm and win-arm64 builds
* fix using arm64 tools for build
fix finding vs2017 dynamically
* change install-powershellremoting.ps1 script to use reg provider rather than reg.exe so that error doesn't show on success
fix formatting issue in cmake.defs
* add check that path being read from config file is valid
address PR feedback
* fix copying of PowerShell.Core.Instrumentation as VS2017 puts it in $HOME/source
address PR feedback
* enable win-arm and win-arm64 builds
* fix using arm64 tools for build
fix finding vs2017 dynamically
* change install-powershellremoting.ps1 script to use reg provider rather than reg.exe so that error doesn't show on success
fix formatting issue in cmake.defs
* add check that path being read from config file is valid
address PR feedback
* fix copying of PowerShell.Core.Instrumentation as VS2017 puts it in $HOME/source
address PR feedback
Remove unnecessary check for Paths.count > 0 as there is code later to use the current working directory since -Path is not a mandatory parameter.
Updated ShouldProcess to output the internal action on adding paths rather than the user action (which is the cmdlet name).
Updated tests to not specify -Path
Fix#5594
Remove unnecessary check for Paths.count > 0 as there is code later to use the current working directory since -Path is not a mandatory parameter.
Updated ShouldProcess to output the internal action on adding paths rather than the user action (which is the cmdlet name).
Updated tests to not specify -Path
Fix#5594
- Fix build in vscode
- Add v2.0.0 tasks.json thanks to Keith Hill
- Add '/property:GenerateFullPaths=true' to build to fix the $mscompile 'problem matcher' not working issue.
1. Remove `[validate]` attribute from parameter so this script can be invoked directly from the web. This doesn't have any negative impact as the $Destination parameter will have a default value if null or empty.
2. Move removal of destination folder later as installing the package requires package management module and archive module (on Windows)
3. On Windows, because files have open handles when run from existing powershell-daily install, I rename the existing files and copy over the new ones. User needs to exit and restart `pwsh` to take effect (similar to macOS/Linux where you have to exit and restart anyways)
- Support '[package]' tag in PR CI to validate packaging changes in PR CI runs.
When using '[package]' tag, regular CI tests will run and packaging steps will also run.
- Fix nightly build on macOS.
- Revert refactoring changes so that it doesn't break remoting to Windows PowerShell 5.1
- Fix the rest of the supported types for remoting
- Put remoting sensitive private members in a descriptive region
Steve Lee