Use the method NativeCommandParameterBinder.NeedQuotes, which is used by powershell native command processor, to check if quotes are needed. If yes, add quotes in the same way as our native command processor.
Also, make 'Invoke-Item' on Linux and OSX able to invoke an executable properly.
Brings the Get-ChildItem more in line with the Unix ls -r and the Windows DIR /S native commands. Like these commands, the cmdlet will display symbolic links to directories found during recursion but will not recurse into them.
Like the Unix ls command---and unlike the Windows DIR /S command--- the cmdlet will recurse into symlinks given on the command line.
* Fix Rename-Item to allow Unix globbing patterns in -Literal paths (#2799)
In the process of normalizing a relative path, PowerShell checks to see
see if the path exists, which it does by invoking
Directory.EnumerateFiles(directory, filename);
On Unix platforms, if the filename contains globbing patterns, such as [ab],
EnumerateFiles (and EnumerateDirectories) will perform the globbing. Using
globbing patterns, a file named 'file[txt].txt' is reported as not existing.
This fix changes the file-existence test on Unix to use a native function
instead of either of the Directory.EnumerateXXX functions.
* Fix for AppVeyor failure
* Changes per code review, and a couple of letter-casing changes.
When 'Remove-Item' is used to remove a symbolic link in Windows, only the link itself is removed. The '-Force' switch is no longer required.
If the directory pointed to by the link has child items, the cmdlet no longer prompts the user to remove the child items---those child items are not removed. The '-Recurse' switch, if given, is ignored.
This brings 'Remove-Item' more in line with the behavior of the 'rm' command on Unix.
Rather than relying on case-insensitive string compares of source and destination paths, use operating system calls to determine whether two paths refer to the same file. This solves not only the case-insensitivity issue but also allows the cmdlet to operate properly if the destination is a hard or symbolic link to the source.
The Windows side is implemented in C#. The Unix side is implemented partially in native code.
This change moves powershell to .NET Core 2.0. Major changes are:
1. PowerShell assemblies are now targeting `netcoreapp2.0`. We are using `microsoft.netcore.app-2.0.0-preview1-001913-00`, which is from dotnet-core build 4/4/17. We cannot target `netstandard2.0` because the packages `System.Reflection.Emit` and `System.Reflection.Emit.Lightweight`, which are needed for powershell class, cannot be referenced when targeting `netstandard2.0`.
2. Refactor code to remove most CLR stub types and extension types.
3. Update build scripts to enable CI builds. The `-cache` section is specified to depend on `appveyor.yml`, so the cache will be invalidated if `appveyor.yml` is changed.
4. Ship `netcoreapp` reference assemblies with powershell to fix the issues in `Add-Type` (#2764). By default `Add-Type` will reference all those reference assemblies when compiling C# code. If `-ReferenceAssembly` is specified, then we search reference assemblies first, then the framework runtime assemblies, and lastly the loaded assemblies (possibly a third-party one that was already loaded).
5. `dotnet publish` generates executable on Unix platforms, but doesn't set "x" permission and thus it cannot execute. Currently, the "x" permission is set in the build script, `dotnet/cli` issue [#6286](https://github.com/dotnet/cli/issues/6286) is tracking this.
6. Replace the use of some APIs with the ones that take `SecureString`.
7. osx.10.12 is required to update to `netcoreapp2.0` because `dotnet-cli` 2.0.0-preview only works on osx.10.12.
8. Add dependency to `System.ValueTuple` to work around a ambiguous type identity issue in coreclr. The issue is tracked by `dotnet/corefx` [#17797](https://github.com/dotnet/corefx/issues/17797). When moving to newer version of `netcoreapp2.0`, we need to verify if this dependency is still needed.
Now `New-Item` can create a file symlink to a file target or to a non-existent target. It can also create a directory symlink to a directory target on Windows.
Based on the conclusion in discussion #3248, this PR fix "OEM" and "Default" encoding in powershell.
1. OEM -- We need an internal fix because .Net Core has no "OEM" encoding.
The fix gives the following PowerShell Core behavior on "OEM" encoding:
- on Windows - as Windows PowerShell based on GetOEMCP() and legacy encodings (System.Text.Encoding.CodePages)
- on Unix - the same as default encoding in PowerShell Core
2. Default -- We need internal fix because CoreFX `Encoding.default` for all platforms is UTF8.
Until we complete the `Encoding RFC` we should restore behavior as in Windows PowerShell.
The fix gives the following PowerShell Core behavior on "Default" encoding:
- on Windows - as Windows PowerShell based on GetACP() and legacy encodings (System.Text.Encoding.CodePages)
- on Unix - UTF-8 without BOM (We are expecting that the same will be [in CoreFX](https://github.com/dotnet/coreclr/issues/10643))
Our private implementation of FailFast was likely introduced
when each individual application needed it's own code to
get Watson reports. The CLR takes care of this for us now,
so we don't need our implementation.
Our method CheckForSevereException was also introduced in
the early days of the CLR - the exceptions it was checking
for aren't actually raised the CLR anymore, they just FailFast.
I removed them as there is a tiny bit of overhead (in code size)
and also in the generated code, e.g. dynamic sites called the method.
This is verified to work "correctly" on Linux in that it gets the
`perror` for the last set value of errno in native code.
No extra mapping or handling needs to be done on our part.
Keeping the strerror_r implementation in the history for the valuable
implementation of config.h.in in the library.
Also includes these bugfixes:
- WSManConfigProvider.GetHelpMaml: Tried to load XML from
MemoryStream that was created from file name string. Use XmlReader
instead.
- WSManConfigProvider.GetHelpMaml: Use Path.Combine instead of
platform-specific directory separator character.
- WSManConfigProvider.GetHelpMaml: CmdletHelpPath MAML XML element
attribute `ID` name casing seems inconsistent with other help.xml
files. XPath 1.0 does not support case-insensitive expressions,
use both `id` and `ID` in query.
- Add Pester test to verify that Get-Help shows provider-specific help.
Fixes#2088
Use 'Path.PathSeparator' instead of ';' to separate paths, so that it uses ';' on windows and ':' on unix.
Also refactor some code as part of the change.
Mostly using R# to automatically refactor, with some manual
fixups where it wouldn't work automatically (e.g. xml comments
on fields) or some it seemed to miss.
Some minor code reformatting was also done on properties near
other stuff I was manually inspecting.
I (Jason Shirk) ran https://github.com/dotnet/codeformatter with the default rules, basically:
codeformatter /nocopyright "/c:DEBUG,UNIX,CORECLR" @files.rsp
This caused a few problems building, which were fixed up manually.
Notable changes:
`this.` is removed unless needed to disambiguate.
private instance fields are renamed to have a `_` prefix.
private static fields are renamed to have a `s_` prefix.
I left some projects alone (like PackageManagement) and also left some generated code alone.
These currently fail at runtime on Nano, and will continue to do so. But
this implements these much needed cmdlets for Open PowerShell.
If there is a way to determine that PowerShell is being run on the Nano
OS at runtime, then we could instead throw a platform unsupported
exception, but this cannot be based on the target compilation framework,
as .NET Core is shared for both Nano and Windows.
These comparisons did not need to be changed as the input path is not
modified. The normalized relate path created from the stack (if this
code path is taken) is created with the correct path separators.
Assuming the path may not be normalized, to make PowerShell slash
agnostic in a filesystem whose "drive" is a '/' and a 'C:\', we need to
compare to both '/' and '\' for users of PowerShell's alternate path
separator on Linux ('\').
Dongbo Wang