diff --git a/src/Microsoft.Management.UI.Internal/ManagementList/Common/KeyboardHelp.cs b/src/Microsoft.Management.UI.Internal/ManagementList/Common/KeyboardHelp.cs
index 0d174fb25..386b33996 100644
--- a/src/Microsoft.Management.UI.Internal/ManagementList/Common/KeyboardHelp.cs
+++ b/src/Microsoft.Management.UI.Internal/ManagementList/Common/KeyboardHelp.cs
@@ -106,7 +106,7 @@ namespace Microsoft.Management.UI.Internal
///
/// Determines if the control key is pressed.
///
- /// True if a control is is pressed.
+ /// True if a control is pressed.
public static bool IsControlPressed()
{
if ((Keyboard.Modifiers & ModifierKeys.Control) == ModifierKeys.Control)
diff --git a/src/Microsoft.Management.UI.Internal/ManagementList/Common/ListOrganizerItem.cs b/src/Microsoft.Management.UI.Internal/ManagementList/Common/ListOrganizerItem.cs
index 469ed5aec..24ff69bc3 100644
--- a/src/Microsoft.Management.UI.Internal/ManagementList/Common/ListOrganizerItem.cs
+++ b/src/Microsoft.Management.UI.Internal/ManagementList/Common/ListOrganizerItem.cs
@@ -153,7 +153,7 @@ namespace Microsoft.Management.UI.Internal
private void ChangeFromEditToDisplayMode()
{
// NOTE : This is to resolve a race condition where clicking
- // on the rename button causes the the edit box to change and
+ // on the rename button causes the edit box to change and
// then have re-toggle.
DependencyObject d = Mouse.DirectlyOver as DependencyObject;
if (d == null || !(this.renameButton.IsAncestorOf(d) && Mouse.LeftButton == MouseButtonState.Pressed))
diff --git a/src/Microsoft.Management.UI.Internal/ManagementList/FilterProviders/FilterRuleTemplateSelector.cs b/src/Microsoft.Management.UI.Internal/ManagementList/FilterProviders/FilterRuleTemplateSelector.cs
index fc40c3c57..0381ef0e6 100644
--- a/src/Microsoft.Management.UI.Internal/ManagementList/FilterProviders/FilterRuleTemplateSelector.cs
+++ b/src/Microsoft.Management.UI.Internal/ManagementList/FilterProviders/FilterRuleTemplateSelector.cs
@@ -26,7 +26,7 @@ namespace Microsoft.Management.UI.Internal
}
///
- /// Selects a template based upon the type of the item and and the
+ /// Selects a template based upon the type of the item and the
/// corresponding template that is registered in the TemplateDictionary.
///
///
diff --git a/src/Microsoft.Management.UI.Internal/commandHelpers/HelpWindowHelper.cs b/src/Microsoft.Management.UI.Internal/commandHelpers/HelpWindowHelper.cs
index efed820e7..ddb9ab191 100644
--- a/src/Microsoft.Management.UI.Internal/commandHelpers/HelpWindowHelper.cs
+++ b/src/Microsoft.Management.UI.Internal/commandHelpers/HelpWindowHelper.cs
@@ -13,7 +13,7 @@ using Microsoft.PowerShell.Commands.ShowCommandInternal;
namespace Microsoft.PowerShell.Commands.Internal
{
///
- /// Implements thw WPF window part of the the ShowWindow option of get-help.
+ /// Implements thw WPF window part of the ShowWindow option of get-help.
///
internal static class HelpWindowHelper
{
diff --git a/src/Microsoft.Management.UI.Internal/commandHelpers/ShowCommandHelper.cs b/src/Microsoft.Management.UI.Internal/commandHelpers/ShowCommandHelper.cs
index 873f15e2c..2268edb99 100644
--- a/src/Microsoft.Management.UI.Internal/commandHelpers/ShowCommandHelper.cs
+++ b/src/Microsoft.Management.UI.Internal/commandHelpers/ShowCommandHelper.cs
@@ -1200,7 +1200,7 @@ Function PSGetSerializedShowCommandInfo
}
///
- /// Sets a succesfull dialog result and then closes the window.
+ /// Sets a successful dialog result and then closes the window.
///
/// Event sender.
/// Event arguments.
diff --git a/src/Microsoft.PowerShell.Commands.Management/commands/management/Eventlog.cs b/src/Microsoft.PowerShell.Commands.Management/commands/management/Eventlog.cs
index 45c484744..89c58acbf 100644
--- a/src/Microsoft.PowerShell.Commands.Management/commands/management/Eventlog.cs
+++ b/src/Microsoft.PowerShell.Commands.Management/commands/management/Eventlog.cs
@@ -1344,7 +1344,7 @@ namespace Microsoft.PowerShell.Commands
///
/// The following is the definition of the input parameter "RemoveSource".
- /// Specifies either to remove the event log and and associated source or
+ /// Specifies either to remove the event log and associated source or
/// source. alone.
/// When this parameter is not specified, the cmdlet uses Delete Method which
/// clears the eventlog and also the source associated with it.
diff --git a/src/Microsoft.PowerShell.Commands.Management/commands/management/GetContentCommand.cs b/src/Microsoft.PowerShell.Commands.Management/commands/management/GetContentCommand.cs
index f689695fc..f2e4598c1 100644
--- a/src/Microsoft.PowerShell.Commands.Management/commands/management/GetContentCommand.cs
+++ b/src/Microsoft.PowerShell.Commands.Management/commands/management/GetContentCommand.cs
@@ -277,7 +277,7 @@ namespace Microsoft.PowerShell.Commands
///
///
///
- /// true if no error occured
+ /// true if no error occurred
/// false if there was an error
///
private bool ScanForwardsForTail(in ContentHolder holder, CmdletProviderContext currentContext)
diff --git a/src/Microsoft.PowerShell.Commands.Utility/commands/utility/WebCmdlet/ConvertFromJsonCommand.cs b/src/Microsoft.PowerShell.Commands.Utility/commands/utility/WebCmdlet/ConvertFromJsonCommand.cs
index 0af97b061..392a58e13 100644
--- a/src/Microsoft.PowerShell.Commands.Utility/commands/utility/WebCmdlet/ConvertFromJsonCommand.cs
+++ b/src/Microsoft.PowerShell.Commands.Utility/commands/utility/WebCmdlet/ConvertFromJsonCommand.cs
@@ -86,7 +86,7 @@ namespace Microsoft.PowerShell.Commands
catch (ArgumentException)
{
// The first input string does not represent a complete Json Syntax.
- // Hence consider the the entire input as a single Json content.
+ // Hence consider the entire input as a single Json content.
}
if (successfullyConverted)
diff --git a/src/Microsoft.PowerShell.ScheduledJob/ScheduledJobStore.cs b/src/Microsoft.PowerShell.ScheduledJob/ScheduledJobStore.cs
index bd9d74396..0938d9829 100644
--- a/src/Microsoft.PowerShell.ScheduledJob/ScheduledJobStore.cs
+++ b/src/Microsoft.PowerShell.ScheduledJob/ScheduledJobStore.cs
@@ -115,7 +115,7 @@ namespace Microsoft.PowerShell.ScheduledJob
}
///
- /// Checks the provided path against the the default path of scheduled jobs
+ /// Checks the provided path against the default path of scheduled jobs
/// for the current user.
///
/// Path for scheduled job definitions.
diff --git a/src/Microsoft.WSMan.Management/CurrentConfigurations.cs b/src/Microsoft.WSMan.Management/CurrentConfigurations.cs
index 0129554c3..95b8f4ba5 100644
--- a/src/Microsoft.WSMan.Management/CurrentConfigurations.cs
+++ b/src/Microsoft.WSMan.Management/CurrentConfigurations.cs
@@ -98,7 +98,7 @@ namespace Microsoft.WSMan.Management
/// Issues a PUT request with the ResourceUri provided.
///
/// Resource URI to use.
- /// False, if operation is not succesful.
+ /// False, if operation is not successful.
public void PutConfigurationOnServer(string resourceUri)
{
if (string.IsNullOrEmpty(resourceUri))
diff --git a/src/Schemas/PSMaml/Maml_HTML_Style.xsl b/src/Schemas/PSMaml/Maml_HTML_Style.xsl
index 3f66ee3f9..955966526 100644
--- a/src/Schemas/PSMaml/Maml_HTML_Style.xsl
+++ b/src/Schemas/PSMaml/Maml_HTML_Style.xsl
@@ -172,7 +172,7 @@
+ this cell is the table header, footer or body -->
bottom
@@ -381,4 +381,4 @@
-
\ No newline at end of file
+
diff --git a/src/System.Management.Automation/FormatAndOutput/common/DisplayDatabase/FormatTable.cs b/src/System.Management.Automation/FormatAndOutput/common/DisplayDatabase/FormatTable.cs
index 43cab48d0..91d0fabf4 100644
--- a/src/System.Management.Automation/FormatAndOutput/common/DisplayDatabase/FormatTable.cs
+++ b/src/System.Management.Automation/FormatAndOutput/common/DisplayDatabase/FormatTable.cs
@@ -19,7 +19,7 @@ namespace System.Management.Automation.Runspaces
{
///
/// This exception is used by Formattable constructor to indicate errors
- /// occured during construction time.
+ /// occurred during construction time.
///
[Serializable]
[SuppressMessage("Microsoft.Naming", "CA1702:CompoundWordsShouldBeCasedCorrectly", MessageId = "FormatTable")]
@@ -70,7 +70,7 @@ namespace System.Management.Automation.Runspaces
/// time.
///
///
- /// The errors that occured
+ /// The errors that occurred.
///
internal FormatTableLoadException(ConcurrentBag loadErrors)
: base(StringUtil.Format(FormatAndOutXmlLoadingStrings.FormatTableLoadErrors))
diff --git a/src/System.Management.Automation/FormatAndOutput/common/ListWriter.cs b/src/System.Management.Automation/FormatAndOutput/common/ListWriter.cs
index 407c0d5dc..165f042f7 100644
--- a/src/System.Management.Automation/FormatAndOutput/common/ListWriter.cs
+++ b/src/System.Management.Automation/FormatAndOutput/common/ListWriter.cs
@@ -210,7 +210,7 @@ namespace Microsoft.PowerShell.Commands.Internal.Format
///
/// String to add to the left.
/// Line to print.
- /// LineOuput to write to.
+ /// LineOutput to write to.
private void WriteSingleLineHelper(string prependString, string line, LineOutput lo)
{
if (line is null)
diff --git a/src/System.Management.Automation/FormatAndOutput/common/TableWriter.cs b/src/System.Management.Automation/FormatAndOutput/common/TableWriter.cs
index eb540f490..e21ef5b20 100644
--- a/src/System.Management.Automation/FormatAndOutput/common/TableWriter.cs
+++ b/src/System.Management.Automation/FormatAndOutput/common/TableWriter.cs
@@ -483,7 +483,7 @@ namespace Microsoft.PowerShell.Commands.Internal.Format
if (currentValueDisplayLength < width)
{
// the string is shorter than the width of the column
- // need to pad with with blanks to reach the desired width
+ // need to pad with blanks to reach the desired width
int padCount = width - currentValueDisplayLength;
switch (alignment)
{
diff --git a/src/System.Management.Automation/engine/ComInterop/ComRuntimeHelpers.cs b/src/System.Management.Automation/engine/ComInterop/ComRuntimeHelpers.cs
index 436aad04e..5bd086874 100644
--- a/src/System.Management.Automation/engine/ComInterop/ComRuntimeHelpers.cs
+++ b/src/System.Management.Automation/engine/ComInterop/ComRuntimeHelpers.cs
@@ -322,7 +322,7 @@ namespace System.Management.Automation.ComInterop
Debug.Assert(obj != null);
// GetNativeVariantForObject is very expensive for values that marshal as VT_DISPATCH
- // also is is extremely common scenario when object at hand is an RCW.
+ // also is extremely common scenario when object at hand is an RCW.
// Therefore we are going to test for IDispatch before defaulting to GetNativeVariantForObject.
if (obj is IDispatch)
{
diff --git a/src/System.Management.Automation/engine/ComInterop/VarEnumSelector.cs b/src/System.Management.Automation/engine/ComInterop/VarEnumSelector.cs
index c7f6b1209..275f75f4b 100644
--- a/src/System.Management.Automation/engine/ComInterop/VarEnumSelector.cs
+++ b/src/System.Management.Automation/engine/ComInterop/VarEnumSelector.cs
@@ -211,7 +211,7 @@ namespace System.Management.Automation.ComInterop
if (TypeUtils.IsImplicitlyConvertible(argumentType, candidateManagedType, true))
{
compatibleComTypes.Add(candidateType);
- // Move on to the next type family. We need atmost one type from each family
+ // Move on to the next type family. We need at most one type from each family
break;
}
}
diff --git a/src/System.Management.Automation/engine/CommandDiscovery.cs b/src/System.Management.Automation/engine/CommandDiscovery.cs
index 5de18cdc9..1b000d0ec 100644
--- a/src/System.Management.Automation/engine/CommandDiscovery.cs
+++ b/src/System.Management.Automation/engine/CommandDiscovery.cs
@@ -1473,7 +1473,7 @@ namespace System.Management.Automation
}
// The engine cmdlets get imported (via Import-Module) once when PowerShell starts and the cmdletInfo is added to PSSnapinHelpers._cmdletcache(static) with ModuleName
// as "System.Management.Automation.dll" instead of the actual snapin name. The next time we load something in an InitialSessionState, we look at this _cmdletcache and
- // if the the assembly is already loaded, we just return the cmdlets back. So, the CmdletInfo has moduleName has "System.Management.Automation.dll". So, when M3P Activity
+ // if the assembly is already loaded, we just return the cmdlets back. So, the CmdletInfo has moduleName has "System.Management.Automation.dll". So, when M3P Activity
// tries to access Microsoft.PowerShell.Core\\Get-Command, it cannot. So, adding an additional check to return the correct cmdletInfo for cmdlets from core modules.
else if (InitialSessionState.IsEngineModule(cmdletInfo.ModuleName))
{
diff --git a/src/System.Management.Automation/engine/CommandSearcher.cs b/src/System.Management.Automation/engine/CommandSearcher.cs
index 9745d2aa9..434c36dfe 100644
--- a/src/System.Management.Automation/engine/CommandSearcher.cs
+++ b/src/System.Management.Automation/engine/CommandSearcher.cs
@@ -158,7 +158,7 @@ namespace System.Management.Automation
}
else
{
- // Ok see it it's in the applications list
+ // Ok, see if it's in the applications list
foreach (string path in _context.EngineSessionState.Applications)
{
if (checkPath(path, _commandName))
diff --git a/src/System.Management.Automation/engine/CoreAdapter.cs b/src/System.Management.Automation/engine/CoreAdapter.cs
index c685fa461..42da61261 100644
--- a/src/System.Management.Automation/engine/CoreAdapter.cs
+++ b/src/System.Management.Automation/engine/CoreAdapter.cs
@@ -5940,7 +5940,7 @@ namespace System.Management.Automation
try
{
MethodInfo instantiatedMethod = genericMethod.MakeGenericMethod(inferredTypeParameters.ToArray());
- s_tracer.WriteLine("Inference succesful: {0}", instantiatedMethod);
+ s_tracer.WriteLine("Inference successful: {0}", instantiatedMethod);
return instantiatedMethod;
}
catch (ArgumentException e)
diff --git a/src/System.Management.Automation/engine/ExternalScriptInfo.cs b/src/System.Management.Automation/engine/ExternalScriptInfo.cs
index 642eb4d8f..bcd75bf85 100644
--- a/src/System.Management.Automation/engine/ExternalScriptInfo.cs
+++ b/src/System.Management.Automation/engine/ExternalScriptInfo.cs
@@ -384,7 +384,7 @@ namespace System.Management.Automation
// If we got here, there was some sort of parsing exception. We'll just
// ignore it and assume the script does not implement dynamic parameters.
- // Futhermore, we'll clear out the fields so that the next attempt to
+ // Furthermore, we'll clear out the fields so that the next attempt to
// access ScriptBlock will result in an exception that doesn't get ignored.
_scriptBlock = null;
_scriptContents = null;
diff --git a/src/System.Management.Automation/engine/Modules/PSModuleInfo.cs b/src/System.Management.Automation/engine/Modules/PSModuleInfo.cs
index 1c56e8f92..8dae7db0d 100644
--- a/src/System.Management.Automation/engine/Modules/PSModuleInfo.cs
+++ b/src/System.Management.Automation/engine/Modules/PSModuleInfo.cs
@@ -453,7 +453,7 @@ namespace System.Management.Automation
public ModuleType ModuleType { get; private set; } = ModuleType.Script;
///
- /// This this module as being a compiled module...
+ /// This module as being a compiled module...
///
internal void SetModuleType(ModuleType moduleType) { ModuleType = moduleType; }
diff --git a/src/System.Management.Automation/engine/NativeCommandProcessor.cs b/src/System.Management.Automation/engine/NativeCommandProcessor.cs
index efc8b660c..5ebaccca2 100644
--- a/src/System.Management.Automation/engine/NativeCommandProcessor.cs
+++ b/src/System.Management.Automation/engine/NativeCommandProcessor.cs
@@ -1277,7 +1277,7 @@ namespace System.Management.Automation
/// A boolean that indicates that, when true, output from the process is redirected to a stream, and otherwise is sent to stdout.
/// A boolean that indicates that, when true, error output from the process is redirected to a stream, and otherwise is sent to stderr.
/// A boolean that indicates that, when true, input to the process is taken from a stream, and otherwise is taken from stdin.
- /// A boolean that indicates, when true, that the command to be executed is not part of a pipeline, and otherwise indicates that is is.
+ /// A boolean that indicates, when true, that the command to be executed is not part of a pipeline, and otherwise indicates that it is.
/// A ProcessStartInfo object which is the base of the native invocation.
private ProcessStartInfo GetProcessStartInfo(
bool redirectOutput,
diff --git a/src/System.Management.Automation/engine/TransactedString.cs b/src/System.Management.Automation/engine/TransactedString.cs
index 948cf1d9d..f1bc8f586 100644
--- a/src/System.Management.Automation/engine/TransactedString.cs
+++ b/src/System.Management.Automation/engine/TransactedString.cs
@@ -8,7 +8,7 @@ using System.Transactions;
namespace Microsoft.PowerShell.Commands.Management
{
///
- /// Represents a a string that can be used in transactions.
+ /// Represents a string that can be used in transactions.
///
public class TransactedString : IEnlistmentNotification
{
diff --git a/src/System.Management.Automation/engine/hostifaces/ConnectionBase.cs b/src/System.Management.Automation/engine/hostifaces/ConnectionBase.cs
index b6b571e90..ca3847cc5 100644
--- a/src/System.Management.Automation/engine/hostifaces/ConnectionBase.cs
+++ b/src/System.Management.Automation/engine/hostifaces/ConnectionBase.cs
@@ -661,7 +661,7 @@ namespace System.Management.Automation.Runspaces
}
///
- /// This is queue of all the state change event which have occured for
+ /// This is queue of all the state change event which have occurred for
/// this runspace. RaiseRunspaceStateEvents raises event for each
/// item in this queue. We don't raise events from with SetRunspaceState
/// because SetRunspaceState is often called from with in the a lock.
diff --git a/src/System.Management.Automation/engine/hostifaces/History.cs b/src/System.Management.Automation/engine/hostifaces/History.cs
index dc74a4621..3fe2acb19 100644
--- a/src/System.Management.Automation/engine/hostifaces/History.cs
+++ b/src/System.Management.Automation/engine/hostifaces/History.cs
@@ -1471,7 +1471,7 @@ namespace Microsoft.PowerShell.Commands
);
} while (false);
- // If we are here, an error has occured.
+ // If we are here, an error has occurred.
Exception ex =
new InvalidDataException
(
diff --git a/src/System.Management.Automation/engine/hostifaces/LocalConnection.cs b/src/System.Management.Automation/engine/hostifaces/LocalConnection.cs
index 9f195d7e6..647cc38f3 100644
--- a/src/System.Management.Automation/engine/hostifaces/LocalConnection.cs
+++ b/src/System.Management.Automation/engine/hostifaces/LocalConnection.cs
@@ -884,7 +884,7 @@ namespace System.Management.Automation.Runspaces
return runspaces;
});
- // Notify Engine components that that runspace is closing.
+ // Notify Engine components that runspace is closing.
_engine.Context.RunspaceClosingNotification();
// Log engine lifecycle event.
diff --git a/src/System.Management.Automation/engine/hostifaces/NativeCultureResolver.cs b/src/System.Management.Automation/engine/hostifaces/NativeCultureResolver.cs
index 74306b822..1c6779a0f 100644
--- a/src/System.Management.Automation/engine/hostifaces/NativeCultureResolver.cs
+++ b/src/System.Management.Automation/engine/hostifaces/NativeCultureResolver.cs
@@ -136,7 +136,7 @@ namespace Microsoft.PowerShell
}
}
- // There is atleast 1 duplicate in m_fallbacks which was not added to
+ // There is at least 1 duplicate in m_fallbacks which was not added to
// fallbacksForTheParent array. Resize the array to take care of this.
if (_fallbacks.Length != currentIndex)
{
diff --git a/src/System.Management.Automation/engine/hostifaces/PSDataCollection.cs b/src/System.Management.Automation/engine/hostifaces/PSDataCollection.cs
index d51c96a33..2630a9b34 100644
--- a/src/System.Management.Automation/engine/hostifaces/PSDataCollection.cs
+++ b/src/System.Management.Automation/engine/hostifaces/PSDataCollection.cs
@@ -1522,7 +1522,7 @@ namespace System.Management.Automation
{
InsertItem(psInstanceId, _data.Count, (T)o);
- // set raise events if atleast one item is
+ // set raise events if at least one item is
// added.
raiseEvents = true;
}
diff --git a/src/System.Management.Automation/engine/hostifaces/PowerShell.cs b/src/System.Management.Automation/engine/hostifaces/PowerShell.cs
index a2c3c8b4e..2f8c1564a 100644
--- a/src/System.Management.Automation/engine/hostifaces/PowerShell.cs
+++ b/src/System.Management.Automation/engine/hostifaces/PowerShell.cs
@@ -4351,7 +4351,7 @@ namespace System.Management.Automation
}
finally
{
- // takes care exception occured with invokeAsyncResult
+ // takes care exception occurred with invokeAsyncResult
if (isExceptionOccured && (tempStopAsyncResult != null))
{
tempStopAsyncResult.Release();
@@ -4402,7 +4402,7 @@ namespace System.Management.Automation
}
finally
{
- // takes care exception occured with invokeAsyncResult
+ // takes care exception occurred with invokeAsyncResult
if (isExceptionOccured && (tempStopAsyncResult != null))
{
tempStopAsyncResult.Release();
diff --git a/src/System.Management.Automation/engine/hostifaces/RunspacePoolInternal.cs b/src/System.Management.Automation/engine/hostifaces/RunspacePoolInternal.cs
index aac3acfbd..dbfdeb1f3 100644
--- a/src/System.Management.Automation/engine/hostifaces/RunspacePoolInternal.cs
+++ b/src/System.Management.Automation/engine/hostifaces/RunspacePoolInternal.cs
@@ -1306,7 +1306,7 @@ namespace System.Management.Automation.Runspaces.Internal
///
/// Cleans the pool closing the runspaces that are idle.
/// This method is called as part of a timer callback.
- /// This method will make sure atleast minPoolSz number
+ /// This method will make sure at least minPoolSz number
/// of Runspaces are active.
///
///
diff --git a/src/System.Management.Automation/engine/hostifaces/pipelinebase.cs b/src/System.Management.Automation/engine/hostifaces/pipelinebase.cs
index 0eaa30daa..b4efa7708 100644
--- a/src/System.Management.Automation/engine/hostifaces/pipelinebase.cs
+++ b/src/System.Management.Automation/engine/hostifaces/pipelinebase.cs
@@ -760,7 +760,7 @@ namespace System.Management.Automation.Runspaces
}
///
- /// This is queue of all the state change event which have occured for
+ /// This is queue of all the state change event which have occurred for
/// this pipeline. RaisePipelineStateEvents raises event for each
/// item in this queue. We don't raise the event with in SetPipelineState
/// because often SetPipelineState is called with in a lock.
diff --git a/src/System.Management.Automation/engine/interpreter/ControlFlowInstructions.cs b/src/System.Management.Automation/engine/interpreter/ControlFlowInstructions.cs
index 0fddd2033..debe5284e 100644
--- a/src/System.Management.Automation/engine/interpreter/ControlFlowInstructions.cs
+++ b/src/System.Management.Automation/engine/interpreter/ControlFlowInstructions.cs
@@ -509,7 +509,7 @@ namespace System.Management.Automation.Interpreter
frame.PopPendingContinuation();
// If _pendingContinuation == -1 then we were getting into the finally block because an exception was thrown
- // In this case we just return 1, and the the real instruction index will be calculated by GotoHandler later
+ // In this case we just return 1, and the real instruction index will be calculated by GotoHandler later
if (!frame.IsJumpHappened()) { return 1; }
// jump to goto target or to the next finally:
return frame.YieldToPendingContinuation();
diff --git a/src/System.Management.Automation/engine/lang/scriptblock.cs b/src/System.Management.Automation/engine/lang/scriptblock.cs
index 07f53c132..1ce9c9a42 100644
--- a/src/System.Management.Automation/engine/lang/scriptblock.cs
+++ b/src/System.Management.Automation/engine/lang/scriptblock.cs
@@ -545,7 +545,7 @@ namespace System.Management.Automation
// is a pipeline that emits nothing then result.Count will
// be zero so we catch that and "convert" it to null. Note that
// the return statement is still required in the method, it
- // just recieves nothing from it's argument.
+ // just receives nothing from it's argument.
if (result.Count == 0)
{
return default(T);
diff --git a/src/System.Management.Automation/engine/parser/Parser.cs b/src/System.Management.Automation/engine/parser/Parser.cs
index 1d3f299f3..c01a1157f 100644
--- a/src/System.Management.Automation/engine/parser/Parser.cs
+++ b/src/System.Management.Automation/engine/parser/Parser.cs
@@ -5226,7 +5226,7 @@ namespace System.Management.Automation.Language
SkipToken();
// we don't allow syntax
// : base{ script }
- // as a short for for
+ // as a short for
// : base( { script } )
baseCtorCallParams = InvokeParamParenListRule(lParen, out baseCallLastExtent);
this.SkipNewlines();
diff --git a/src/System.Management.Automation/engine/remoting/client/Job.cs b/src/System.Management.Automation/engine/remoting/client/Job.cs
index 26778bfea..517fda611 100644
--- a/src/System.Management.Automation/engine/remoting/client/Job.cs
+++ b/src/System.Management.Automation/engine/remoting/client/Job.cs
@@ -2360,7 +2360,7 @@ namespace System.Management.Automation
#region finish logic
- // This variable is set to true if atleast one child job failed.
+ // This variable is set to true if at least one child job failed.
private bool _atleastOneChildJobFailed = false;
// count of number of child jobs which have finished
@@ -3926,7 +3926,7 @@ namespace System.Management.Automation
///
/// Id of the breakpoint you want.
/// The runspace id of the runspace you want to interact with. A null value will use the current runspace.
- /// A a breakpoint with the specified id.
+ /// A breakpoint with the specified id.
public override Breakpoint GetBreakpoint(int id, int? runspaceId) =>
_wrappedDebugger.GetBreakpoint(id, runspaceId);
diff --git a/src/System.Management.Automation/engine/remoting/client/Job2.cs b/src/System.Management.Automation/engine/remoting/client/Job2.cs
index b89c94336..df60a2c17 100644
--- a/src/System.Management.Automation/engine/remoting/client/Job2.cs
+++ b/src/System.Management.Automation/engine/remoting/client/Job2.cs
@@ -506,7 +506,7 @@ namespace System.Management.Automation
private const int DisposedTrue = 1;
private const int DisposedFalse = 0;
- // This variable is set to true if atleast one child job failed.
+ // This variable is set to true if at least one child job failed.
// count of number of child jobs which have finished
private int _finishedChildJobsCount = 0;
diff --git a/src/System.Management.Automation/engine/remoting/client/clientremotesessionprotocolstatemachine.cs b/src/System.Management.Automation/engine/remoting/client/clientremotesessionprotocolstatemachine.cs
index d035ce6e8..a0dbd5bbc 100644
--- a/src/System.Management.Automation/engine/remoting/client/clientremotesessionprotocolstatemachine.cs
+++ b/src/System.Management.Automation/engine/remoting/client/clientremotesessionprotocolstatemachine.cs
@@ -456,7 +456,7 @@ namespace System.Management.Automation.Remoting
_stateMachineHandle[(int)RemoteSessionState.EstablishedAndKeyRequested, (int)RemoteSessionEvent.KeySendFailed] += SetStateToClosedHandler;
// TODO: All these are potential unexpected state transitions.. should have a way to track these calls..
- // should atleast put a dbg assert in this handler
+ // should at least put a dbg assert in this handler
for (int i = 0; i < _stateMachineHandle.GetLength(0); i++)
{
for (int j = 0; j < _stateMachineHandle.GetLength(1); j++)
diff --git a/src/System.Management.Automation/engine/remoting/client/remotepipeline.cs b/src/System.Management.Automation/engine/remoting/client/remotepipeline.cs
index 164e9f11f..67e4b7153 100644
--- a/src/System.Management.Automation/engine/remoting/client/remotepipeline.cs
+++ b/src/System.Management.Automation/engine/remoting/client/remotepipeline.cs
@@ -34,7 +34,7 @@ namespace System.Management.Automation
private readonly ConnectCommandInfo _connectCmdInfo = null;
///
- /// This is queue of all the state change event which have occured for
+ /// This is queue of all the state change event which have occurred for
/// this pipeline. RaisePipelineStateEvents raises event for each
/// item in this queue. We don't raise the event with in SetPipelineState
/// because often SetPipelineState is called with in a lock.
diff --git a/src/System.Management.Automation/engine/remoting/client/remoterunspace.cs b/src/System.Management.Automation/engine/remoting/client/remoterunspace.cs
index c8e611487..dc85e0498 100644
--- a/src/System.Management.Automation/engine/remoting/client/remoterunspace.cs
+++ b/src/System.Management.Automation/engine/remoting/client/remoterunspace.cs
@@ -48,7 +48,7 @@ namespace System.Management.Automation
private long _currentLocalPipelineId = 0;
///
- /// This is queue of all the state change event which have occured for
+ /// This is queue of all the state change event which have occurred for
/// this runspace. RaiseRunspaceStateEvents raises event for each
/// item in this queue. We don't raise events from with SetRunspaceState
/// because SetRunspaceState is often called from with in the a lock.
diff --git a/src/System.Management.Automation/engine/remoting/commands/PushRunspaceCommand.cs b/src/System.Management.Automation/engine/remoting/commands/PushRunspaceCommand.cs
index bf8041d2e..4268c21de 100644
--- a/src/System.Management.Automation/engine/remoting/commands/PushRunspaceCommand.cs
+++ b/src/System.Management.Automation/engine/remoting/commands/PushRunspaceCommand.cs
@@ -265,7 +265,7 @@ namespace Microsoft.PowerShell.Commands
}
// for the console host and Graphical PowerShell host
- // we want to skip pushing into the the runspace if
+ // we want to skip pushing into the runspace if
// the host is in a nested prompt
System.Management.Automation.Internal.Host.InternalHost chost =
this.Host as System.Management.Automation.Internal.Host.InternalHost;
diff --git a/src/System.Management.Automation/engine/remoting/commands/ReceivePSSession.cs b/src/System.Management.Automation/engine/remoting/commands/ReceivePSSession.cs
index 98d2afa3b..0cab5f02a 100644
--- a/src/System.Management.Automation/engine/remoting/commands/ReceivePSSession.cs
+++ b/src/System.Management.Automation/engine/remoting/commands/ReceivePSSession.cs
@@ -36,7 +36,7 @@ namespace Microsoft.PowerShell.Commands
///
/// The user can specify how command output data is returned by using the public
/// OutTarget enumeration (Host, Job).
- /// The default actions of this cmdlet is to always direct ouput to host unless
+ /// The default actions of this cmdlet is to always direct output to host unless
/// a job object already exists on the client that is associated with the running
/// command. In this case the existing job object is connected to the running
/// command and returned.
@@ -1340,7 +1340,7 @@ namespace Microsoft.PowerShell.Commands
Host = 1,
///
- /// Asynchronous mode. Receive-PSSession ouput data goes to returned job object.
+ /// Asynchronous mode. Receive-PSSession output data goes to returned job object.
///
Job = 2
}
diff --git a/src/System.Management.Automation/engine/remoting/fanin/InitialSessionStateProvider.cs b/src/System.Management.Automation/engine/remoting/fanin/InitialSessionStateProvider.cs
index 9e751dcdb..d428e521f 100644
--- a/src/System.Management.Automation/engine/remoting/fanin/InitialSessionStateProvider.cs
+++ b/src/System.Management.Automation/engine/remoting/fanin/InitialSessionStateProvider.cs
@@ -2446,7 +2446,7 @@ namespace System.Management.Automation.Remoting
// Parameters = A dictionary of parameter names -> Modifications
// Modifications = A dictionary of modification types (ValidatePattern, ValidateSet) to the interim value
// for that attribute, as a HashSet of strings. For ValidateSet, this will be used as a collection of strings
- // directly during proxy generation. For For ValidatePattern, it will be combined into a regex
+ // directly during proxy generation. For ValidatePattern, it will be combined into a regex
// like: '^(Pattern1|Pattern2|Pattern3)$' during proxy generation.
Dictionary commandModifications = new Dictionary(StringComparer.OrdinalIgnoreCase);
diff --git a/src/System.Management.Automation/engine/remoting/server/ServerSteppablePipelineSubscriber.cs b/src/System.Management.Automation/engine/remoting/server/ServerSteppablePipelineSubscriber.cs
index 328571647..068849ec1 100644
--- a/src/System.Management.Automation/engine/remoting/server/ServerSteppablePipelineSubscriber.cs
+++ b/src/System.Management.Automation/engine/remoting/server/ServerSteppablePipelineSubscriber.cs
@@ -162,7 +162,7 @@ namespace System.Management.Automation
if (!driver.NoInput || isProcessCalled)
{
// if there is noInput then we
- // need to call process atleast once
+ // need to call process at least once
break;
}
}
diff --git a/src/System.Management.Automation/engine/remoting/server/serverremotesession.cs b/src/System.Management.Automation/engine/remoting/server/serverremotesession.cs
index c09c75d34..fe31e0fad 100644
--- a/src/System.Management.Automation/engine/remoting/server/serverremotesession.cs
+++ b/src/System.Management.Automation/engine/remoting/server/serverremotesession.cs
@@ -900,7 +900,7 @@ namespace System.Management.Automation.Remoting
}
///
- /// This handler method runs the negotiation algorithm. It decides if the negotiation is succesful,
+ /// This handler method runs the negotiation algorithm. It decides if the negotiation is successful,
/// or fails.
///
///
diff --git a/src/System.Management.Automation/help/BaseCommandHelpInfo.cs b/src/System.Management.Automation/help/BaseCommandHelpInfo.cs
index 0c70b8159..58ecdf28d 100644
--- a/src/System.Management.Automation/help/BaseCommandHelpInfo.cs
+++ b/src/System.Management.Automation/help/BaseCommandHelpInfo.cs
@@ -462,7 +462,7 @@ namespace System.Management.Automation
return string.Empty;
}
- // I think every cmdlet description should atleast have 400 characters...
+ // I think every cmdlet description should at least have 400 characters...
// so starting with this assumption..I did an average of all the cmdlet
// help content available at the time of writing this code and came up
// with this number.
diff --git a/src/System.Management.Automation/help/HelpUtils.cs b/src/System.Management.Automation/help/HelpUtils.cs
index d4f2abe25..ab4a39f36 100644
--- a/src/System.Management.Automation/help/HelpUtils.cs
+++ b/src/System.Management.Automation/help/HelpUtils.cs
@@ -41,7 +41,7 @@ namespace System.Management.Automation
// In case of other modules, the help is under moduleBase/ or
// under moduleBase//.
// The code below creates a similar layout for CurrentUser scope.
- // If the the scope is AllUsers, then the help goes under moduleBase.
+ // If the scope is AllUsers, then the help goes under moduleBase.
var userHelpPath = GetUserHomeHelpSearchPath();
string moduleBaseParent = Directory.GetParent(moduleBase).Name;
diff --git a/src/System.Management.Automation/help/MamlCommandHelpInfo.cs b/src/System.Management.Automation/help/MamlCommandHelpInfo.cs
index 774ef1fc1..81a9a4a74 100644
--- a/src/System.Management.Automation/help/MamlCommandHelpInfo.cs
+++ b/src/System.Management.Automation/help/MamlCommandHelpInfo.cs
@@ -343,7 +343,7 @@ namespace System.Management.Automation
return string.Empty;
}
- // I think every cmdlet description should atleast have 400 characters...
+ // I think every cmdlet description should at least have 400 characters...
// so starting with this assumption..I did an average of all the cmdlet
// help content available at the time of writing this code and came up
// with this number.
diff --git a/src/System.Management.Automation/help/MamlNode.cs b/src/System.Management.Automation/help/MamlNode.cs
index 8f8df05bb..fa1753915 100644
--- a/src/System.Management.Automation/help/MamlNode.cs
+++ b/src/System.Management.Automation/help/MamlNode.cs
@@ -209,7 +209,7 @@ namespace System.Management.Automation
{
mshObject = new PSObject(GetInsidePSObject(xmlNode));
// Add typeNames to this MSHObject and create views so that
- // the ouput is readable. This is done only for complex nodes.
+ // the output is readable. This is done only for complex nodes.
mshObject.TypeNames.Clear();
if (xmlNode.Attributes["type"] != null)
diff --git a/src/System.Management.Automation/help/PSClassHelpProvider.cs b/src/System.Management.Automation/help/PSClassHelpProvider.cs
index e4c74c639..2d80b2cc8 100644
--- a/src/System.Management.Automation/help/PSClassHelpProvider.cs
+++ b/src/System.Management.Automation/help/PSClassHelpProvider.cs
@@ -279,7 +279,7 @@ namespace System.Management.Automation
}
if (e != null)
- s_tracer.WriteLine("Error occured in PSClassHelpProvider {0}", e.Message);
+ s_tracer.WriteLine("Error occurred in PSClassHelpProvider {0}", e.Message);
if (reportErrors && (e != null))
{
diff --git a/src/System.Management.Automation/help/ProviderHelpInfo.cs b/src/System.Management.Automation/help/ProviderHelpInfo.cs
index 01ae37294..c55a1eaaa 100644
--- a/src/System.Management.Automation/help/ProviderHelpInfo.cs
+++ b/src/System.Management.Automation/help/ProviderHelpInfo.cs
@@ -101,7 +101,7 @@ namespace System.Management.Automation
return string.Empty;
}
- // I think every provider description should atleast have 400 characters...
+ // I think every provider description should at least have 400 characters...
// so starting with this assumption..I did an average of all the help content
// available at the time of writing this code and came up with this number.
Text.StringBuilder result = new Text.StringBuilder(400);
diff --git a/src/System.Management.Automation/namespaces/FileSystemContentStream.cs b/src/System.Management.Automation/namespaces/FileSystemContentStream.cs
index 1a9935cb1..833093195 100644
--- a/src/System.Management.Automation/namespaces/FileSystemContentStream.cs
+++ b/src/System.Management.Automation/namespaces/FileSystemContentStream.cs
@@ -413,7 +413,7 @@ namespace Microsoft.PowerShell.Commands
(e is UnauthorizedAccessException) ||
(e is ArgumentNullException))
{
- // Exception contains specific message about the error occured and so no need for errordetails.
+ // Exception contains specific message about the error occurred and so no need for errordetails.
_provider.WriteError(new ErrorRecord(e, "GetContentReaderIOError", ErrorCategory.ReadError, _path));
return null;
}
diff --git a/src/System.Management.Automation/namespaces/FileSystemProvider.cs b/src/System.Management.Automation/namespaces/FileSystemProvider.cs
index 12c1b193a..3f8c32a2f 100644
--- a/src/System.Management.Automation/namespaces/FileSystemProvider.cs
+++ b/src/System.Management.Automation/namespaces/FileSystemProvider.cs
@@ -9155,7 +9155,7 @@ namespace System.Management.Automation.Internal
# Return a hash table in the following format:
# DirectoryPath is the directory to be created.
- # PathExists is a bool to to keep track of whether the directory already exist.
+ # PathExists is a bool to keep track of whether the directory already exist.
#
# 1) If DirectoryPath already exists:
# a) If -Force is specified, force create the directory. Set DirectoryPath to the created directory path.
diff --git a/src/System.Management.Automation/namespaces/FileSystemSecurity.cs b/src/System.Management.Automation/namespaces/FileSystemSecurity.cs
index 97ab38158..c886bbd0a 100644
--- a/src/System.Management.Automation/namespaces/FileSystemSecurity.cs
+++ b/src/System.Management.Automation/namespaces/FileSystemSecurity.cs
@@ -222,7 +222,7 @@ namespace Microsoft.PowerShell.Commands
// Transfer it to the new file / directory.
// We keep these two code branches so that we can have more
- // granular information when we ouput the object type via
+ // granular information when we output the object type via
// WriteSecurityDescriptorObject.
if (Directory.Exists(path))
{
diff --git a/src/System.Management.Automation/namespaces/LocationGlobber.cs b/src/System.Management.Automation/namespaces/LocationGlobber.cs
index e4ab1f3cf..e5ae0d7b9 100644
--- a/src/System.Management.Automation/namespaces/LocationGlobber.cs
+++ b/src/System.Management.Automation/namespaces/LocationGlobber.cs
@@ -1967,7 +1967,7 @@ namespace System.Management.Automation
string driveRoot = drive.Root.Replace(StringLiterals.AlternatePathSeparator, StringLiterals.DefaultPathSeparator);
driveRoot = driveRoot.TrimEnd(StringLiterals.DefaultPathSeparator);
- // Keep on lopping off children until the the remaining path
+ // Keep on lopping off children until the remaining path
// is the drive root.
while ((!string.IsNullOrEmpty(providerPath)) &&
(!providerPath.Equals(driveRoot, StringComparison.OrdinalIgnoreCase)))
diff --git a/src/System.Management.Automation/namespaces/TransactedRegistryKey.cs b/src/System.Management.Automation/namespaces/TransactedRegistryKey.cs
index dac6f6c08..443c2547d 100644
--- a/src/System.Management.Automation/namespaces/TransactedRegistryKey.cs
+++ b/src/System.Management.Automation/namespaces/TransactedRegistryKey.cs
@@ -1331,7 +1331,7 @@ namespace Microsoft.PowerShell.Commands.Internal
/**
* Retrieves the current state of the dirty property.
*
- * A key is marked as dirty if any operation has occured that modifies the
+ * A key is marked as dirty if any operation has occurred that modifies the
* contents of the key.
*
* @return true if the key has been modified.
diff --git a/src/System.Management.Automation/utils/ClrFacade.cs b/src/System.Management.Automation/utils/ClrFacade.cs
index 0372b249c..cabac1bd3 100644
--- a/src/System.Management.Automation/utils/ClrFacade.cs
+++ b/src/System.Management.Automation/utils/ClrFacade.cs
@@ -356,7 +356,7 @@ namespace System.Management.Automation
dmtfDateTime += date.Second.ToString(frmInt32).PadLeft(2, '0');
dmtfDateTime += ".";
- // Construct a DateTime with with the precision to Second as same as the passed DateTime and so get
+ // Construct a DateTime with the precision to Second as same as the passed DateTime and so get
// the ticks difference so that the microseconds can be calculated
DateTime dtTemp = new DateTime(date.Year, date.Month, date.Day, date.Hour, date.Minute, date.Second, 0);
Int64 microsec = ((date.Ticks - dtTemp.Ticks) * 1000) / TimeSpan.TicksPerMillisecond;
diff --git a/src/System.Management.Automation/utils/tracing/SysLogProvider.cs b/src/System.Management.Automation/utils/tracing/SysLogProvider.cs
index 27d0e133f..93e959fff 100755
--- a/src/System.Management.Automation/utils/tracing/SysLogProvider.cs
+++ b/src/System.Management.Automation/utils/tracing/SysLogProvider.cs
@@ -381,7 +381,7 @@ namespace System.Management.Automation.Tracing
/// See man 3 syslog for more info.
///
///
- /// The OR of a priority and facility in the SysLogPriority enum indicating the the priority and facility of the log entry.
+ /// The OR of a priority and facility in the SysLogPriority enum indicating the priority and facility of the log entry.
///
/// The message to put in the log entry.
[DllImport(libpslnative, CharSet = CharSet.Ansi, EntryPoint = "Native_SysLog")]
diff --git a/src/powershell-native/Install-PowerShellRemoting.ps1 b/src/powershell-native/Install-PowerShellRemoting.ps1
index f42fcde2d..ea164367a 100644
--- a/src/powershell-native/Install-PowerShellRemoting.ps1
+++ b/src/powershell-native/Install-PowerShellRemoting.ps1
@@ -11,7 +11,7 @@
# If no parameter is specified, it means that this instance of PowerShell is registering itself.
#
# Assumptions:
-# 1. The CoreCLR and the the PowerShell assemblies are side-by-side in $PSHOME
+# 1. The CoreCLR and the PowerShell assemblies are side-by-side in $PSHOME
# 2. Plugins are registered by version number. Only one plugin can be automatically registered
# per PowerShell version. However, multiple endpoints may be manually registered for a given
# plugin.
@@ -188,7 +188,7 @@ function Install-PluginEndpoint {
$pluginPath = Join-Path $resolvedPluginAbsolutePath "pwrshplugin.dll"
- # This is forced to ensure the the file is placed correctly
+ # This is forced to ensure the file is placed correctly
Copy-Item $targetPsHome\pwrshplugin.dll $resolvedPluginAbsolutePath -Force -Verbose -ErrorAction Stop
$pluginFile = Join-Path $resolvedPluginAbsolutePath "RemotePowerShellConfig.txt"